Enzo Auto Detailing Canberra

Opti-Coat Certified Installer

New Car Paint Protection Canberra

Grab your key, leave your dealer and drive to the specialists.


By professional paint decontamination and machine buffing, we will firstly remove your car's factory defects and improve the paint-work to real brand new condition.

Next step, from basic to comprehensive protection, we are experienced to take care of all kinds of budgets and desired outcomes for car protection packages.

Opti-Coat Ceramic Coating | Interior Protection Packages

Opti-Coat ceramic coating is applied to your vehicles paint surface offering swirl mark resistance, chemical resistance , anti graffiti and is super hydrophobic. Prevents acid etching from bird lime, acid rain and other toxic substances. The ceramic particles condense to form a scratch resistant film that is chemically fused to the factory paint.

The super hydrophobic and anti graffiti properties of Opti-Coat ceramic coating means any liquid that comes in contact with the surface will bead up and roll off together with any dirt particles that try to attach to the surface. Your vehicle will be easier to clean and maintain.

Opti-Coat ceramic coating will also give additional hardness to your paint work providing you with the best possible protection from damaging environmental contaminants and harsh chemicals that would effect the factory clear coat on your vehicle.

Opti-Coat has been setting the industry standard with unique ceramic coating technologies. It has been independently tested to Australian Standards by the Commonwealth Scientific & Industrial Research Organisation and exceeds operational and safety standards for The Boeing Company.

  • SiC Technology Protection from chemical etching

  • Multi-Layer High Gloss Coating

  • Paint Enhancement

  • 9H Hardness

  • 7 Years Warrant







The primary function of a ceramic coating is to protect the surface it is applied to. SiO2 and TiO2 based resins will hydrolyse and diminish over time. The hydrolysis and degradation of SiO2 and TiO2 based resins is accelerated with high pH products (such as alkaline degreasers) as well as at low pH cleaners (acid wash, etc.). By removing the Oxygen group and using SiC linkages as the polymer backbone, our coatings are unaffected by low or high pH levels (acids and alkalines) and resistant to UV breakdown.  

Opti-Coat ceramic coating is not a paint protection wax or paint sealant that will wash away after a few washes and deteriorate over time, it is an SIC 9H hardness coating that becomes harder than your factory paint this results in the reduction of swirls and finer scratches  and creates a permanent bond to your vehicles paint surface like an additional layer of clear coat and can be only removed by abrasion.

Check the price for your vehicle size

Paint Protection Film - PPF Vinyl Wrap 

A Tough Defense Against The Harsh Road.

PPF is flexible and thick film, landing on the car paint surface as an almost invisible super armor to protect your car from stone chips, scratching, tree branches, etc. 

Our Opti-Coat Pro+ ceramic coating provides cutting-edge SIC technology protection from chemical contamination. However, if you drive often on highway and back road,  PPF is the finest protection for all kinds of mechanical damages and defects.


Our paint protection films are self-healing and heat curable and have many chemically enhanced properties including elasticity, transparency, stain and abrasion resistance. A combination of hard and soft co-polymers reacts to rebind and retain their shape causing these PPF films to reseal and heal themselves.

  • Self-Healing Coating -  Slight abrasions, scratches or outdoor hazards can be easily averted with these time-tested products.

  • Improvd Gloss - Silicone elements in the substrate also enhance the original paint producing a smooth high-gloss finish.

  • Stain Resistence - The anti-stain protection is a self-cross-linking technology that enhances coating properties, such as hardness, water, and solvent resistance.

Basic PPF Kit:

10 inches – 20 inches of bonnet (partial), fender tips (partial), side mirrors

Standard PPF Kit:

10 inches – 20 inches of bonnet(partial),fender tips(partial),front bumper and side mirrors 


Ultimate PPF Kit: 

Full hood, full fenders, front bumper,side mirrors and A-pillars

Whole car PPF:

All exterior painted area


The packages above represent the most popular and common options. If you would like a more specified package to suit your car, please contact Enzo Auto Detailing and allow us to guide you through the process. Average costs and times are generalized from our experiences, depending on the make and model or the kit desired it, time’s may vary.

If you are considering a partial wrap only, we recommend looking at our range of ceramic coatings by offering protection against chemical, dirt and increase scratch resistance for areas not covered by the PPF Vinyl.


By combining a ceramic coating and rock chips guard PPF together, we are available to offer a combo package to save you money.


Visit Enzo Auto Detailing Canberra

7/15 Darling St, Mitchell ACT 2911